Get a quote

Fibre optic cable

The short cords that decide whether the link works

Free quotes from fibre optic cable suppliers across South Africa. One request, no obligation.

Yellow, aqua, blue, green
A 1U patch panel with blue and green connectors and yellow patch cords in a comms rack
EVT 03APCGreen plug, angled end face

Link sheet: Fibre Patch Cords and Pigtails

LNK FIB 259
01Suits
Racks, panels, closures and FTTH boxes
02How it is done
Simplex or duplex, UPC or APC ends
03Scope
Stock lengths or made to length
04Check first
APC never mated with UPC
05Lead time
Stock cords in days; custom lengths longer

Most fibre faults in a rack are not in the cable at all. They are in a dirty, damaged or wrong fibre patch cord. A patch cord is a short length of fibre with a connector on each end, joining a patch panel to a switch or one panel to another. A pigtail has a connector on one end only and is spliced onto the cable inside a panel or closure. This page covers the connector pairs, UPC and APC, colours, lengths and jackets, MPO cords and polarity, and why every cord should be inspected and cleaned before it goes in.

Simplex, duplex and connector pairs

A simplex cord carries one fibre; a duplex cord carries two, one for each direction, which is what most switches need. Cords are named by their ends: LC-LC, SC-SC, SC-LC, LC-ST and so on. LC is the usual connector in panels and SFP modules, SC is common in FTTH and older panels, and ST and FC turn up on older equipment and test gear. See fibre optic connectors for each type. Count the ports on each panel and switch before ordering, note the connector on each, and allow a few spare cords for faults and moves.

UPC and APC, single-mode and multimode

  • Single-mode cords usually have yellow jackets. UPC connector bodies are usually blue.
  • APC connectors are green, with the end face angled at 8 degrees for lower back reflection. Standard on FTTH and video.
  • Multimode OM3 and OM4 cords are aqua, with beige or aqua connectors; OM4 is also sold in violet.

Never mate APC with UPC: the end faces don't meet properly, which damages them and adds loss. Match the fibre too: a multimode cord on a single-mode link loses most of the light.

Lengths, jackets and pigtails

Cords come in standard lengths, often 1, 2, 3, 5 and 10 m, or made to length. Too long means loops stuffed into the rack; too short means strain on the connectors. Measure along the route through the cable managers, not straight across the rack. Indoor cords are often LSZH; armoured patch cords have a flexible steel tube for exposed runs on factory floors. Pigtails, usually 12 colours to match the fibres, are spliced in patch panels and splice closures as part of fibre splicing.

MPO cords, polarity and cleaning

MPO cords and trunks carry 8, 12, 16 or 24 fibres in one ferrule for data centres. They come in polarity types A, B and C, so the transmit fibre at one end reaches the receive fibre at the other. Mixing types is a common cause of a link that won't come up. Whatever the cord, inspect and clean before every connection: dust on an end face is the most common cause of high loss. Never look into a cord's end. Fibre testing confirms the result.

What to put in your request

  • The connector at each end, such as LC/UPC
  • Single-mode or multimode, and the OM grade
  • Simplex or duplex
  • Lengths and quantities of each
  • LSZH or armoured jackets if needed

Fibre Patch Cords and Pigtails for estates, offices, factories, mines, farms and more

  • Houses and home offices: a cord from the termination box to the ONT or a home office switch
  • Estates, complexes and body corporates: cords in gatehouse and clubhouse cabinets and street cabinets
  • Offices, business parks and shops: duplex cords from patch panels to switches in floor cabinets
  • Factories, warehouses and plants: armoured cords to switches on the factory floor and in control panels
  • Mines, quarries and heavy industry: rugged cords in control rooms and plant switch cabinets
  • Farms, wine estates and lodges: cords in small wall boxes at the house, cellar and pump house
  • Schools, campuses, hospitals and municipalities: cords in school, hospital and municipal comms rooms
  • Data centres and server rooms: hundreds of LC and MPO cords between racks and panels
  • Network operators, ISPs and contractors: SC/APC and LC cords in cabinets, exchanges and tower sites

Frequently asked questions

Do you sell patch cords yourselves?

No. We are a free quote request service. We pass your request to independent suppliers who quote you directly. We hold no stock. Send the connector pairs, fibre type, lengths and quantities, and they can quote from stock or made to length.

Why is one end of my cord green?

Green means APC, an angled end face. Blue usually means single-mode UPC. A cord can be APC at one end and UPC at the other, for example SC/APC to LC/UPC, to join an FTTH box to equipment. Match each end to its port.

Can I clean a connector with my shirt?

Rather not. Use a proper one-click cleaner or lint-free wipes with fibre cleaning fluid, then look at it with an inspection probe. Cloth leaves fibres and grease behind.

Can I get cords made to length?

Yes. Many suppliers make cords and pigtails to length with any connector pair, and pre-terminated MPO trunks are always made to order. Allow a few extra days and ask for test results with them.

Fibre Patch Cords and Pigtails by province and city

More fibre supplies and services

Free quote request, no obligation

Request quotes for fibre patch cords

Fill it in the way a fibre contractor would size up the job: the route and the cores, the fibres to splice, the homes to connect, the trench to dig, or simply how many. The planner works out the cable, drums, splices, splitters or duct and draws it as you type. Suppliers and contractors in your area quote you directly.

Fibre job sheetFibre Patch Cords and Pigtails
Job
49854
Date
2026-11-19
Cost to you
Free

01The job

02How many (optional, it helps the quote)

Your requestA guide

-
-
-
-
-
-
Estimate
-

A guide from your figures, not a quote.

03On site now

04Your list (optional)

  1. 01
  2. 02
Up to 12 lines: cable, cords, connectors, panels, closures, splices or work.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable fibre optic cable suppliers, installers and contractors. See our privacy policy.

Get a free quote