Get a quote

Fibre optic cable

Plan the cores once, dig the trench once

Free quotes from fibre optic cable suppliers across South Africa. One request, no obligation.

Light in glass, not copper
A wooden drum of black outdoor fibre optic cable on a steel stand beside an open trench with orange ducts on a Midrand business park verge
EVT 039/125Core and cladding in µm

Link sheet: Fibre Optic Cable

LNK FIB 924
01Suits
Links between buildings, routes and racks
02How it is done
Loose tube, tight buffered, armour or ADSS
03Scope
From 2 to 288 cores
04Check first
Fibre type matches the equipment
05Lead time
Stock cable in days; special builds longer

A link between two buildings, a backbone through an office park or a pole route along a farm road all start with the same question: which cable? Fibre optic cable carries light in a glass core about the width of a hair, so it ignores electrical interference, runs for kilometres and is worth nothing to a copper thief. The choices are the fibre type, the construction, the jacket and the number of cores. This page walks through each one, what a supplier needs from you to quote, and where every related topic is covered in more detail.

Single-mode or multimode

Inside every cable the glass is 125 µm across. What differs is the core. Single-mode fibre has a core of about 9 µm (written 9/125) and is the choice for anything outdoors, between buildings, along a route or on an operator network. Multimode fibre has a 50 µm core and suits short links inside buildings and server rooms, where its cheaper optics make sense. Most new links between buildings are single-mode, because it leaves room for faster equipment later. Never mix the two in one link.

Constructions for each route

  • Loose tube: fibres in gel-filled or dry water-blocked tubes, for ducts, burial and outdoor runs.
  • Tight buffered: 900 µm buffered fibres for indoor distribution, easy to terminate.
  • Armoured: corrugated steel tape or wire under the jacket for rodents, termites and direct burial. See armoured fibre cable.
  • Aerial: ADSS or figure-8 for poles. See aerial fibre cable.
  • Drop cable: small cables of 1 to 4 fibres to a home or unit. See FTTH drop cable.

Outdoors the jacket is UV-stable black polyethylene; inside buildings ask for LSZH where fire safety calls for it.

Core counts, spares and the colour code

Cable comes in 2, 4, 6, 8, 12, 24, 48 and up to 288 cores. Allow spare cores: the extra glass costs little compared with digging the trench again. A 12 core cable for a link that needs two is normal practice. The fibres and tubes follow a colour order, commonly blue, orange, green, brown, slate, white, red, black, yellow, violet, rose and aqua, though some networks use their own: check the spec before splicing. At each end the fibres land in patch panels or splice closures, then patch cords run to the equipment.

Buying per metre or per drum

Suppliers sell cable per metre or per drum, and outdoor cable often comes on drums of 2 km or 4 km. The price rises with core count, armour and jacket. To quote, a supplier needs the route length with slack, the fibre type, the core count, the construction and where it will run: duct, buried, aerial or indoor. If you also need the cable laid, ask for fibre installation, trenching and testing in the same request. Not sure what you need? Describe the job: what must be connected, how far apart and what equipment sits at each end, and a supplier or fibre contractor will suggest the cable. Fibre between floors usually belongs in a network cabling job.

What to put in your request

  • The route length, with slack at each end
  • Single-mode or multimode, and the core count
  • Where it runs: duct, buried, poles or indoors
  • Whether you need it laid, spliced and tested
  • Delivery address and when you need it

Fibre Optic Cable for estates, offices, factories, mines, farms and more

  • Houses and home offices: a buried link from the house to a gate camera, cottage or workshop
  • Estates, complexes and body corporates: duct and cable networks linking homes, gatehouses and clubhouses
  • Offices, business parks and shops: backbones between floors, buildings and the server room on a business park
  • Factories, warehouses and plants: armoured links between factory buildings, warehouses and control rooms
  • Mines, quarries and heavy industry: long rugged links between shafts, plants, workshops and control rooms
  • Farms, wine estates and lodges: runs to pump houses, sheds, cellars and gates along farm roads
  • Schools, campuses, hospitals and municipalities: campus links between school blocks, hospital wings and municipal offices
  • Data centres and server rooms: high count trunks and backbones between halls, rooms and racks
  • Network operators, ISPs and contractors: backbone, feeder and distribution cable for operators and wireless ISPs

Frequently asked questions

Do you sell fibre optic cable yourselves?

No. We are a free quote request service. We pass your request to independent fibre optic cable suppliers and installers who work in your area, and they quote you directly. We hold no stock and lay no cable ourselves.

How many cores should I order?

Count what you need today, then add spares for future equipment, cameras or a second building. Many installers would rather run 12 or 24 cores than 4 on any buried route, because the cable is cheap compared with the civils. Ask the installer for a recommendation.

Is this the same as home fibre internet?

No. A home fibre package is sold by an internet service provider and installed by the network operator that built the street's network. We do not sell packages or check coverage. Our quotes are for private fibre: cable to buy and links you own.

How long does delivery take?

Common cable is often in stock and delivered within days. High core counts, armoured constructions and long drums can take weeks. Ask the supplier when you request the quote, especially if civils are already booked.

Fibre Optic Cable by province and city

More fibre supplies and services

Free quote request, no obligation

Request quotes for fibre optic cable

Fill it in the way a fibre contractor would size up the job: the route and the cores, the fibres to splice, the homes to connect, the trench to dig, or simply how many. The planner works out the cable, drums, splices, splitters or duct and draws it as you type. Suppliers and contractors in your area quote you directly.

Fibre job sheetFibre Optic Cable
Job
57196
Date
2026-11-19
Cost to you
Free

01The job

02The route (optional, it helps the quote)

Route and loss traceA guide

-
-
-
-
-
-
Estimate
-

A guide from your figures, not a quote.

03On site now

04Your list (optional)

  1. 01
  2. 02
Up to 12 lines: cable, cords, connectors, panels, closures, splices or work.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable fibre optic cable suppliers, installers and contractors. See our privacy policy.

Get a free quote